EDAN M3 User Manual page 25

M3 Vital Signs Monitor User Manual
NIBP START/STOP
③
ALARM LIMIT
TREND/WAVEFORM
④
HOT KEY
(RECORD/
SHORTCUT
FOR CHANGING
⑤
PATIENT TYPE)
MENU
⑥
⑦
The icons on the front panel:
⑧
CHARGE Indicator
⑨
POWER Indicator
To inflate the cuff and start blood measuring. During the
measuring process, press the button to stop measuring.
(For the monitor with NIBP function).
For SpO
is changed to ALARM LIMIT button. Press this button to
set the alarm limit of the parameters of SpO
Press this button to switch between waveform display,
trend graph and trend list display.
In the monitoring mode, this hot key is configured as the
record button by default. Press it, and you can print out the
KEY
currently displayed waveforms, trend graph, trend lists or
alarm lists. Pressing it while recording can stop recording.
In the spot check mode, this hot key is configured as the
shortcut key for changing the patient type. You can
rapidly alter the patient type by pressing this button.
Press to open the SYSTEM MENU. Refer to Chapter 4
System Menu for details.
UP
Select the items in menu, or decrease or increase the
items. Confirm the selection by pressing OK.
OK
DOWN
The LED besides this icon indicates the charging status.
When the battery is being recharged, the LED is bright.
The LED besides this icon indicates the power status.
When the monitor connects to the mains power supply, the
LED is bright.
only monitor, the NIBP STASRT/STOP button
2
- 19 -
Introduction
.
2