Screen Display; General Display Mode - EDAN M3 User Manual

M3 Vital Signs Monitor User Manual
The monitor provides extensive functions such as visual and audible alarms, recording and
storage for trend data, SpO
events and so on. Recording and mobile storage are optional functions for monitor.

3.2 Screen Display

The monitor is equipped with LCD. The patient parameters, waveforms, alarm messages, patient
ID, time, monitor status and other information can be reflected from the screen.
If the monitor is outfitted with the modules SpO
NIBP and TEMP are onscreen in the general display mode. If the monitor is configured to the
double-parameter measuring function as NIBP+SpO
displayed onscreen. Also, the monitor can be configured to single parameter mode with SpO
measuring only or NIBP measuring only. In SpO
parameter of SpO or NIBP is displayed.
2
The configuration is preset by the manufacturer; it can not be changed by the user.

3.2.1 General Display Mode

The screen is divided into three areas:
1 Parameter area
2 Waveform/Trend list/Alarm list area
3 Information area
/NIBP/TEMP measurements review, net connection, nurse call, alarm
2
Figure 3-2 Main display with waveform
- 10 -
, NIBP and TEMP, the three parameters SpO
2
or NIBP+TEMP, double parameters will be
2
only or NIBP only measuring mode, the single
2
Introduction
,
2
2