Work Mode Description - EDAN SE-1200 Series User Manual

SE-1200 Series Electrocardiograph User Manual

4.4 Work Mode Description

There are five work modes in SE-1200 series electrocardiograph.
AUTO:
MANU:
RHYT:
R-R:
VCG
(only configurable
for SE-1200 Express)
For details on printing ECG reports in the Auto, Manual, Rhythm, R-R or VCG (only
configurable for SE-1200 Express) mode, please refer to Section 6.1 "Printing an ECG Report".
In the auto mode, the ECG data can be analyzed, saved, printed and
transmitted. The lead groups are switched automatically according to
the lead sequence during the printing course. After the ECG waves of
one lead group are printed within a certain time, the system switches to
print ECG waves of another lead group automatically. 1mV calibration
marks will be printed at the beginning of an ECG report.
In the manual mode, you can determine the lead group to be displayed
and printed. Pressing the Left or Right arrow can switch among the lead
groups.
In the rhythm mode, the ECG data can be saved and transmitted. You
can print 60s rhythm-lead ECG waveform of one lead in the Single
Lead style or 20s rhythm-lead ECG waveform of three leads in the
Three Leads style.
In the R-R analysis mode, you can select a lead to print its R-R
histogram, R-R trend chart, 180s compressed ECG waveform and all
the R-R interval values.
In the VCG mode, X, Y, Z waves and frontal, horizontal, sagittal planes
can be displayed. 10s sampled ECG data can be analyzed, and vector
waves, vector loops, measure information, diagnosis information can be
printed.
- 47 -
Basic Operation Guidance