Quick Setup Submenu
Figure 24.
The
Quick Setup
communication settings. This submenu contains the following items:
•
Auto-Image — Press the
position the current input (see
•
Input Format — Press the navigation buttons to select the desired video input format
(see
Input Format
submenu.
•
Input EDID — Press the navigation buttons to select a discrete EDID or match the
output resolution (see
submenu.
•
Output Resolution — Press the navigation buttons to select from a list of output
resolutions and refresh rates (see
options, prefaced by
•
Audio Mute — Press the navigation buttons to globally mute or unmute the audio.
Test Pattern — Press the navigation buttons to select an available test pattern to
•
display or to turn a test pattern off (see
patterns are
Audio Test Pattern
•
DHCP Mode — Press the navigation buttons to enable or disable DHCP mode.
IP Address — Press the and buttons to change octets. Press the
•
buttons to change the value of a selected octet.
Quick Setup Submenu
submenu provides quick access to common input, output, and
button to perform a one-time Auto-Image to size and
Enter
Auto-Image
on page 33). The current input is displayed in the title of the
EDID
on page 33). The current input is displayed in the title of the
Resolution
through
. The default setting is
C1
C8
,
Crop
Alternating Pixels
(pink noise). The default setting is
IN1608 xi Scaling Presentation Switcher • Operation
on page 32).
on page 35). There are eight custom
720p @ 60 Hz
Test Pattern
on page 39). The available test
,
,
Color Bars
Grayscale
.
Off
.
,
, and
Blue Mode
>
and
<
29