Quick Setup Submenu - Extron electronics IN1606 series User Manual

Quick Setup Submenu

Figure 20.
The
Quick Setup
communication settings. This submenu contains the following submenu items:
Auto-Image — Press the
Auto-Image
(see
Input Format — Press the navigation buttons to select the desired video input format (see
Input Format
Input EDID — Press the navigation buttons to select a discrete EDID or match the output
resolution (see
Output Resolution — Press the navigation buttons to select from a list of output
resolutions and refresh rates (see
prefaced by C1 through C8. The default setting is 720p @ 60 Hz.
Audio Mute — Press the navigation buttons to globally mute or unmute the audio.
Test Pattern — Press the navigation buttons to select an available test pattern to display
or to turn a test pattern off (see
,
Crop Alternating Pixels
(pink noise). The default setting is
Pattern
DHCP Mode — Press the navigation buttons to enable or disable DHCP mode.
IP Address — Press the
buttons to change the value of a selected octet.
Quick Setup Submenu (IN1608)
submenu provides quick access to common input, output, and
button to automatically size and position the current input
Enter
on page 30).
on page 31). The current input is displayed in the title of the submenu.
EDID on page 31). The current input is displayed in the title of the submenu.
Resolution
Test Pattern
,
Color Bars
and
Left Right
IN1606 and IN1608 Series Scaling Presentation Switcher • Operation
on page 33). There are eight custom options,
on page 36). The available test patterns are
, , , and
Grayscale Blue Mode
.
Off
buttons to change octets. Press the
Audio Test
and
Up Down
27