Hardware Pages; Unit Information Page - Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual

•
•

Hardware Pages

The
communication settings, updating firmware, executive and power modes, date and time
settings, passwords, and reset modes. Click the
these pages.
Figure 81.

Unit Information Page

The
connected device. Click the
Navigation Bar
The following information is displayed:
•
•
•
•
•
•
Click the
associated licensing.
Insertion Port — This column lists the insertion port numbers. The insertion port
number must be stated from a specific starting point. This number is automatically
entered as the Telnet port number when you establish communication with the insertion
port. All insertion ports for the DTP inputs and output are numbered sequentially,
starting with the number in the text field for input 7.
To change the insertion port numbers:
In the field for input 7, enter the first port number. Input 8 and the DTP
Insertion Port
output are assigned subsequent port numbers.
Baud Rate, Data Bits, Stop Bits, and Parity — These four columns contain
drop-down menus from which to select the port parameters of the inputs and output.
These menus are available only if
pages contain unit information and options for device naming,
Hardware
Hardware Global Navigation Bar
page gives a non-configurable view of information about the
Unit Information
Unit Information
to open the page.
Part number
Model name
Model description
Firmware version
Temperature
Default web version
License Information
IN1608 xi Scaling Presentation Switcher • Internal Web Pages
was selected as the insertion method.
Ethernet
tab (see figure 81,
Hardware
icon ( ) on the
2
• Device name
DHCP status
•
• IP address
• Subnet mask
• Default gateway address
• MAC address
DNS server
•
button to view details about third-party packages and
) to open
1
Hardware Global
124