Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual page 77

Command
Advanced Configuration Commands (continued)
Front Panel Lockout Mode (executive mode)
Enable mode 1
Enable mode 2
Disable
View status
Input Aspect Ratio (per input)
Set for fill
Set to follow
View aspect setting
Overscan Mode (applies only to SMPTE input resolutions)
Set value
View status
HDCP Notification (displayed on non-HDCP displays with HDCP input selected)
Enable notification
Disable notification
Query notification
NOTES:
X!
= Input selection
X#
= Input video format
X(
= Enable or disable
X2$
= Front Panel Lockout mode status
X2%
= Overscan
X2^
= Aspect ratio setting
ASCII Command Response
(Host to Scaler) (Scaler to Host)
1X
Exe1
2X
Exe2
0X
Exe0
X2$]
X
In verbose modes 2 and 3:
Exe
E X! }
*1ASPR Aspr
E X! }
*2ASPR Aspr
E X! } X2^]
ASPR
In verbose modes 2 and 3:
Aspr
E X# X2% }
* OSCN Oscn
E X# } X2%]
OSCN
In verbose modes 2 and 3:
Oscn
E }
N1HDCP HdcpN1
E }
N0HDCP HdcpN0
E } X(]
NHDCP
In verbose modes 2 and 3:
HdcpN
1-8
1 = RGB, 2 = YUV, 3 = RGBcvS, 4 = S-video, 5 = Composite,
6 = HDMI
0 = off or disabled, 1 = on or enabled
0 = off or disabled (default)
1 = mode 1 (complete front panel lockout)
2 = mode 2 (input selection and volume control only)
0 = 0.0% (default for RGB and HDMI)
1 = 2.5% (default for YUV, RGBcvS, S-Video, and CV)
2 = 5.0%
1 = fill (default), 2 = follow
IN1608 xi Scaling Presentation Switcher • SIS Configuration and Control
Additional Description
] Lock the entire front panel.
] Limit front panel control to input
switching and volume control only.
]
Unlock the front panel.
View lock mode (
X2$]
X! ] Fill the entire output.
*1
X! ] Maintain the input aspect ratio.
*2
View the aspect ratio setting
input
X! X2^]
*
X# X2%]
* Set the overscan value to
View overscan setting
format
X# X2%]
*
] Display a green screen (default).
] Mute output to black.
View HDCP notification setting
X(]
X2$
).
X2^
for
X!
.
X2%
.
X2%
for input
X#
.
X(
.
69