Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual page 118

To adjust the program volume:
1. Click the
Mix Controls
2.
Adjust the level using any of the following methods (
Click and drag the fader handle to the desired level.
•
Click in the level text field below the fader and enter a new value. Then, press the
•
< > or < > key to apply the change.
Enter Tab
Click the or
• Up Down
increase or decrease the level in 0.1 dB increments.
3. If desired for the
Program Volume
limits to define new minimum and maximum values within the original range.
4.
To mute the program volume, click the
fader.
To adjust individual output gain:
1. Click the
Program Volume Offsets
below the
Group Controls
NOTE: If the
Program Volume Offsets
cursor to the right of the heading above the
becomes a "hand" icon and a
Click where the cursor is currently positioned (see
display the
Program Assets
2. Adjust the level of each desired output by any of the following methods:
Figure 69. Program Offsets Panel
Click and drag the fader handle to the desired level.
•
Click in the level text field below the fader and enter a new value. Then, press the
•
< > or < > key to apply the change.
Enter Tab
Click the or
• Up Down
decrease the level in 0.1 dB increments.
IN1608 xi Scaling Presentation Switcher • Internal Web Pages
tab (see figure 68, , on page 108).
1
arrow button to the right of the level text field to respectively
fader, click and drag the minimum and maximum soft
button (
Mute
button. The
Program Offsets
panel.
button is not visible on the screen, slide the
Program Volume
Program Offsets
panel.
arrow button to the right of the level text field to increase or
):
6
) below the
7 Program Volume
panel appears
fader, until the cursor
text box pops up.
in the illustration above) to
1
110