Captive Screw Signal Insertion - Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual

RS-232 protocol
You also may need to set the RS-232 protocol of the addressed port to match the connected
device. You can do this using any of the following methods:
Using the Product Configuration Software (see the IN1606 and IN1608 Series PCS Help
•
file).
• Using SIS commands (see the
Using the internal web page (see
•
page 124.

Captive Screw Signal Insertion

Figure 35 is an example of a typical captive screw insertion, in which an Extron IPCP module
provides control of a Blu-Ray player via the scaler. Configure this type of insertion as follows:
NOTE: Each captive screw insert is for the associated input or output only and cannot
be tied to any other input or output.
1. Connect an RS-232 cable from the IPCP module to the RS-232 captive screw port
(input port 8 in this example).
2. If necessary, enable the port for captive screw (see
Screw
The RS-232 control signal is inserted directly onto the TP port of the same number and
cannot be tied to any other port.
3.
Connect the TP cable to the endpoint as usual.
4. Connect a serial cable from the endpoint to the device to be controlled.
100-240V ~ 1.5 A MAX
50/60 Hz
IN1608 xi IPCP SA
Figure 35.
Configure Serial Port
Insertion, on page 44).
RS-232
Insertion
IN1608 xi IPCP SA
COM 1
Tx Rx G RTS CTS
IR/SERIAL
1
S G S
1
3 5
7 8
Tx Rx G Tx Rx
SIG LINK SIG
CONFIGURABLE
OVER DTP
2
HDMI
HDMI RS-232 IR
4 6
DTP IN DTP IN DTP IN
Tx Rx G Tx Rx
INPUTS
RS-232
INPUTS SIG
POWER
AUDIO
12V
0.7A MAX
DTP OUT
DTP HDMI 4K 230 Tx
RS-232
Typical Captive Screw Insertion to an Input Endpoint
IN1608 xi Scaling Presentation Switcher • Operation
SIS commands on page 75).
Baud Rate, Data Bits, Stop Bits, and Parity
Enabling Ethernet and Captive
Network
COM 2 COM 3 DIGITAL I/O AV LAN 2 AV LAN 3
Tx Rx G Tx Rx G 1 2 3 4 G
RELAYS eBUS
2 1 2 C 3 4 C +V +S -S G
G PWR OUT = 6W
LAN AV LAN 1
L 1 R L 3 R L 5 R
1C
1A
LINK SIG LINK
OVER DTP
1B
HDBT
HDMI
RS-232 IR
L 2 R L 4 R L 6 R
DTP
Tx Rx G Tx Rx DTP OUT
OUTPUTS AUDIO INPUTS
LINK OVER DTP
IR
RS-232
Tx Rx G Tx Rx
FULL HIGH DEFINITION 1080P VIDEO OUTPUT
TM
BLU-RAY DISC PLAYER
Blu-Ray Player
on
AMPLIFIED OUTPUT
2x25W(8Ω)/2x50W(4Ω)
L R
1 2
CLASS 2 WIRING
+48V
MIC/LINE RESET RS-232
VARIABLE
2 L R
Tx Rx G
+48V
OUTPUTS REMOTE
46