Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual page 130

— Lets you select a screen color that is displayed when the screen saver is
• Custom
enabled. Do either of the following:
Click the desired screen color in the swatch table. The RGB value of the
•
selected color is displayed in the
Enter a color value in the
•
next to it.
2. Select a duration to display the screen saver before the output sync is disabled.
Select the
• Disable Sync After
set duration without an active input. When selected, the
becomes available.
In the field, enter a value in the field or click the
• Duration
specify a duration to wait before disabling output sync during inactivity. The default
is to never disable the output sync.
HDCP Notification panel
HDCP notification indicates when HDCP content restrictions prevent a video signal from
passing. Select one of the following radio buttons (see
• — Displays a black or muted screen when an encrypted source is sent to a
Black
display that is not HDCP-compliant.
— Displays a green screen when an encrypted source is displayed on a sink that
•
Green
is not HDCP-compliant (default).
OSD Input Information panel
1. To display input information on the OSD after input selection, select the
Screen Display (OSD)
2. In the
Duration On Screen
set a duration the information is displayed on the on-screen menu. The default value is
3.
Auto Switch panel
Auto switch mode automatically switches inputs based on detected input signals.
1. Select the
Enable Auto Switch
2. Click the radio button of the desired type of auto switch mode from the following:
• Priority to the highest active input number
input to the highest numbered active input.
• Priority to the lowest active input number
input to the lowest numbered active input.
Mute Video and Sync panel
Click the
Mute Video and Sync
the HDMI outputs.
IN1608 xi Scaling Presentation Switcher • Internal Web Pages
RGB Color Value
RGB Color Value
checkbox to disable the scaler output sync after a
figure
checkbox ( ).
3
field, enter a value or click the
checkbox ( ) to enable auto switch mode.
4
button ( ) to mute the active video and disable sync on
5
field.
field and click the button
Apply
Duration On Screen
and arrows to
Up Down
80, , on the previous page):
2
Enable On
or arrow button to
Up Down
— Automatically switches the
— Automatically switches the
field
122