Quick Setup Submenu - Extron electronics IN1606 User Manual

Quick Setup Submenu

Figure 13.
The Quick Setup submenu allows quick access to common input, output, and
communication settings. This submenu contains the following submenu items:
Auto-Image — Press the Enter button to execute an Auto-Image on the current input (see
Auto-Image
Input Format — Press the Navigation buttons to select the desired video input format (see
Input Format
Input EDID — Press the Navigation buttons to select a discrete EDID or match the output
resolution (see
Output Resolution — Press the Navigation buttons to select from a list of output
resolutions and refresh rates (see
prefaced by C1 through C8. The default setting is 720p @ 60 Hz.
Audio Mute — Press the Navigation buttons to globally mute or unmute the audio.
Test Pattern — Press the Navigation buttons to select an available test pattern to display
or to turn a test pattern off (see
Crop, Alternating Pixels, Color Bars, Grayscale, Blue Mode, and Audio Test Pattern (pink
noise). The default setting is Off.
DHCP — Press the Navigation buttons to enable or disable DHCP mode.
IP Address — Press the Left and Right buttons to change octets. Press the Up and Down
buttons to change the value of a selected octet.
Quick Setup Submenu (IN1608)
on page 20).
on page 21). The current input is displayed in the title of the submenu.
EDID on page 21). The current input is displayed in the title of the submenu.
Resolution
Test Pattern
IN1606 and IN1608 Series Scaling Presentation Switcher • Operation
on page 22). There are eight custom options,
on page 24). The available test patterns are
17