Connecting A Transceiver Cable - DEC VAXstation 3100 Owner's Manual

Do)
Sliding Lock
5.2.4 Connecting a Itansceiver Cable
A transceiver cable is the physical connection between a standard
Ethernet network interfece, the H4000, H4005, or DELNI, and a
VAXstation 3100.
Tb connect a transceiver cable:
1 Turn the system unit off (0).
2 Remove the loopback connector.
3 Attach the 15-pin connector on the standard Ethernet
transceiver cable to the back of the system imit. Make
the connection in this way if your system is a standalone
networked system.
4 Use the screwdriver included in your shipment to move the
sliding lock (part of the standard Ethernet connector) to make
the standard Ethernet connection secure. Figure 5--8 shows
the correct connection.
Figure 5-8 Connecting a Transceiver Cable to ttie System
Unit
MLO-002237
5-14 Connecting to a Network