Installing A Bottom Dress Cover; Installing Bottom Dress Cover - DEC VAXstation 3100 Owner's Manual

4.3 Installing a Bottom Dress Cover
Bottom Dress Cover
Rubber Foot
The RZ55 or TK50Z-GA expansion box comes with a bottom dress
cover. Tb install the bottom dress cover, follow these steps:
1 Place the expansion box upside down on a level surface.
2 Remove the four rubber feet (optional).
3 Locate the bottom dress cover. Lane up the molded inserts
on the inside of the bottom dress cover over the holes on the
bottom of the eaqpansion box. Note that you must match the
size of the inserts with the size of the holes. See Figure 4-3.
4 Slide the bottom dress cover until it locks into place.
Figure 4^ Installing Bottom Dress Cover
ML(M>05080
4r-6 Adding and Using Expansion Boxes