Changing The Keyboard Language - DEC VAXstation 3100 Owner's Manual

I^ble 7—6 lists the error messages that can appear in the FMTing
line for the erase disk utility and gives an explanation for each
message. ^ ^
Table 7-6 Error Messages for Erase Disk Utility
Code
Meaning
Illegal unit number entered
Error occurred during a SCSI bus command
Reassign blocks failed (no more replacement blocks
av€dlable)
Unit not ready
Illegal device type for operation
SCSI bus hung after reset attempts
Data compare error
7.9 Changing the Keyboard Language
lb change the language of your keyboard, make sure your system
is in console mode by pressing the halt button on the back of your
system unit.
Note See your operating system documentation for shutdown procedures
before turning your system off. Also, you should not turn off, halt,
or restart the system without notifying work group members.
1 At the console prompt (»>), enter TEST 54 and press The
keyboard language menu appears.
2 Select a language from the keyboard language menu.
In the following example, the keyboard language is changed from
English (3) to Italiano (9).
» > TEST 54 iReturnj
0) Dansk
8)
Fran^ais {Suisse Romande)
1)
Deutsch 9) I t a l i a n o
2)
Deutsch (Schweiz) 10)
Nederlands
3}
English
11) Norsk
4)
English (British/Irish)
12)
Portugues
5)
Espanol
13) Suomi
6)
Frangais 14)
Svenska
7)
Frangais (Canadian) 15)
Vlaams
3? » > 9 1Return 1
7-22 Running Diagnostics