Halt Button - DEC VAXstation 3100 Owner's Manual

Halt Button
2 Put the Model 48 in console mode by pressing the halt button
on the back of the sjrstem. Use a pen or a small pointed object
to press the button. Fig^e 7—1 shows the location of the halt
button.
Note See operating system documentation for shutdown procedures
before turning your system off. Also, you should not turn
off, halt, or restart the system without notifying work group
members.
Figure 7-1 Halt Button
MLO-002223
Enter TEST and a space followed by the device identifier, and
press the Return key.
> » TEST 7 IReturn I
In this example, you are testing the SCSI-A bus controller.
If you want to test a consecutive series of devices, enter TEST
followed by the first and last numbers of the series, as shown
in Table 7-1, and press the Return key.
» > TEST F 7 IReturn i
In the above example, the system tests device F, then E, D, C,
B, A, 9, 8, and 7.
r \
7-i Running Diagnostics