DEC VAXstation 3100 Owner's Manual page 6

8 Adding Options
8.1 Printers 8-1
8.2 Modems 8-4
8.3 Tablet 8-6
8.4 Monitors 8-6
8.4.1 Long Monitor Cable Option 8-7
8.5 Graphics Coprocessor Module^Color Option 8-7
8.6 SPX Color Graphics Accelerator 8-7
A System Parameters
A.l Automatic Booting A-2
A. 1.1 Setting the Default Boot Device A-2
A.1.2 Changing the Default Recovery Action A-3
A.1.3 Setting the D^ault Boot Flags A-5
A.2 Enabling the Server to Boot Satellite Systems Remotely A-5
A.3 Using an Alternate Console with Yoiir System A-6
B SCSI IDs
B.l SCSI ID Default Settings B-1
B.2 Setting the SCSI ID B-3
B.3 Setting SCSI Switches B-6
VI
Power-Up, Seif-Test, and TEST 50 Status and Error
Codes
C.l Monochrome Video Circuits (MONO) C-2
C.2 Time-of-Year Clock (CLK) C-2
C.3 Nonvolatile RAM (NVR) C-3
C.4 Serial Line Controller (DZ) C-3
C.5 System Memory (MEM) C-6
C.6 Memory Management (MM) C-7
C.7 Floating Point (FP) C-7
C.8 Interval Timer (IT) C-7
C.9 SCSI Bus Controllers (SCSI-A and SCSI-B) C-8
C.l0 Interrupt Controller and Ethernet ID ROM (SYS) C-15
C.ll Graphics Coprocessor Module/Color Option C-16
C.l2 Ethernet Circuits (NI) C-17