Setting Up Your System; Identifying System Unit Ports And Connectors; Lifting Equipment - DEC VAXstation 3100 Owner's Manual

Warning Because of the weight of the system unit and the monitor, two
people should lift the equipment out of the hoooes and place it on a
work surface. Figure 2-2 shows the proper way to lift equipment.
Figure 2-2 Lifting Equipment
MLO-002462
Save cartons and packing material. Alwajrs repack your
equipment in its original packing material when moving your
VAXstation 3100 Model 48. This precaution will protect the hard
disks &om damage.
2.3 Setting Up Your System
You are ready to set up your system unit.
2.3.1 Identifying System Unit Ports and Connectors
Turn the system unit so that the back of it &ces you.
Facing the back of the sjrstem luiit, take a minute to look at all
the ports and connectors shown in Figure 2-3. Symbols (called
icons) molded on the bezel identify each port and connector you
will need to install your system. The icons are defined in the
Preface.
The SCSI port on the back of the system unit has a cover that is
not shown in Figure 2-3. Leave the SCSI cover on until you are
ready to add an expansion box.
2-A Installing System Hardware