Device Status Codes (Ddmmsstt - DEC VAXstation 3100 Owner's Manual

Table C-14 Device Status Codes (DDMMSSTT)
Status Codes Definition
FF
01
03
05
10
12
20
22
24
26
28
2A
30
32
34
36
38
3A
40
42
44
46
48
4A
50
52
54
Device is untested.
No eiror.
This device is reserved by the host (SCSI controller).
Device did not respond to selection.
Device did not set cur_stat(req) soon enough when
changing phase.
Jitter on the phase lines when changing phase.
Device set conunand phase twice.
Device changed phase before command complete.
Device failed to set cur_stat(req) when getting
command.
Device failed to clear cur_stat(req) when getting
command.
Command phase out of sequence.
Stuck in command phase.
Device set data in phase twice.
Device failed to set cur_stat(req) when returning data.
Device failed to clear ciir_stat(req) when returning data.
Device changed data in phase before transferring any
data.
Data in phase out of sequence.
Stuck in data in phase.
Target set status phase twice.
Target failed to set c\ir_stat(req) when returning data.
Target failed to clear cur_8tat(req) when returning data.
Target changed status phase before transferring any
data.
Status phase out of sequence.
Stuck in status phase.
Target set message in phase twice.
Target faOed to set cur_stat(req} when returning data.
Target failed to clear cuur_stat(req) when returning data.
(continued on next page)
C-12 Power-Up, Self-Test, and TEST 50 Status and Error Codes