DEC VAXstation 3100 Owner's Manual page 15

Margin Icon Definitions
o
<$-
Throughout this manual, symbols or icons in the margin identify
important switches, buttons, connectors, or procedures. These
icons are briefly described here. Figure 2-3 shows the locations
for many of the ports and switches.
Icons That Signal Procedures
Certain icons act as reminders about important procedures that
are being described in the nearby text.
This icon signals that you turn to another guide (for instance,
the monitor guide) for more complete instructions on a certain
procedure. Tlien you return to the procedures in this manu£d.
This representation of an on/off switch shows the off (0) position.
This icon signals that you should turn off one or more devices, as
described in the nearby text.
The on/off switch is shown in the on ( I ) position. This icon
signals that you shovdd turn on one or more devices, as described
in the nearby text.
Icons for Ports, Connectors, and Buttons
This section describes the icons that appear on the bezel for the
back of the system unit. The icon for a port or connector appears
in the margin to signal that you connect a cable to that port or
connector. The icon for a button appears to signal that you press
that button. See Figure 2-3 for icon locations on the bezel.
The SCSI icon in the margin signals tiiat you attach a cable or
terminator to the SCSI port.
The icon for Ethernet signals a procedure with one of the Ethernet
connectors or the network select button.
The halt icon signals that you press the halt button to put the
system into console mode.
The keyboard icon identifies the connector where you put the
keyboard cable.
XV