Connecting The Thinwire Cable And T-Connector To The Decxm Transceiver; Terminating The Ethernet Connection - DEC 3000 800 Owner's Manual

Connect the ThinWire network cable to the T-Connector and
Step 4:
ThinWire then the T-connector to the DECXM transceiver as shown in
Figure 5–4.
Cable and
T-Connector
Figure 5–4 Connecting the ThinWire Cable and T-Connector to
Step 5: If your workstation is the last one on a ThinWire network, you
Terminate need to terminate the network connection. Do this by connecting
a terminator, rather than a ThinWire network cable, to one
Connection
side of the T-connector on the DECXM transceiver as shown in
Figure 5–5.
Figure 5–5 Terminating the Ethernet Connection
Connecting to a 10BASE2 Network
the DECXM Transceiver
Connecting the System to a Network 5–9
MLO-011209
MLO-011210