Connecting The Power Cords; Connecting The Monitor Power Cord - DEC VAXstation 3100 Owner's Manual

Go
2.3.6 Connecting the Power Cords
The power cord is an electrical ground for your system. lb connect
your system to a power source, perform the foUovdng steps:
1 Make sure that the monitor and the system unit on/o£f
switches are off (0).
cautiwi While the system unit automatically adjusts itself to the correct
voltage, your monitor may not Refer to your monitor guide
when checking the monitor voltage rating.
2 Ensure that your monitor's voltage requirements match the
voltage of the AC power outlet you plan to plug the monitor
into before proceeding. Monitors require either 110 VAC or
220 VAC.
3 Connect one end of the short power cord to the monitor. Plug
the other of the power cord into the system unit's AC power
outlet, as shown in Figure 2-11.
Figure 2-11 Connecting the Monitor Power Cord
Monitor Power Cord
MLO-002219
2-14 Installing System Hardware