DEC VAXstation 3100 Owner's Manual page 83

Figure 5-1 Network Select Button Set for ThinWire Ettiemet
standard Ethernet Light
Network Select Button
ThinWire Ethernet Light
(To
MLO-002222
If your system is set incorrectly, follow these steps:
1 Locate the recessed network select button.
2 Press the network select button so that the light to the right
of the network select button (Thin\Wre Ethernet Light) comes
on.
5.1.2 Verifying TliinWire Ethernet Network Installation
Tb verify your ThinWire Ethernet installation:
1 Turn your VAXstation 3100 on ( I ). The green light to the
right of the network select button should come on. The
following display appears:
» >
If the console prompt (»>) does not appear, press the halt button
on the back of the s3rstem unit.
Connecting to a Network 5-3