Preparing Your System For An Expansion Box - DEC VAXstation 3100 Owner's Manual

4.4 Preparing Your System for on Expansion Box
no)
SCSI Cover
Lift Locking Tab
to Release
lb add an expansion box to your system, you must first remove
the SCSI cover and the terminator fi:t)m the SCSI port.
1 Turn your system off (0).
2 lb remove the SCSI covct, press your fingers on the locking
tab and lift the cover to release it, as shown in Figure 4—4.
Figure 4r-4 Removing the SCSI Cover
MLO-00222S
Adding and Using Expansion Boxes 4-7