Connect an AUI Ethernet cable (BNE4C-xx) to the AUI port on
Step 2:
Ethernet Cable
the rear of the system unit, shown in Figure 5–1 of this chapter.
Step 3:
Connect the other end of the AUI Ethernet cable to the AUI port
on the DECXM transceiver, as shown in Figure 5–3.
DECXM
Transceiver
Figure 5–3 Connecting the AUI Ethernet Cable to the DECXM
Connecting to a 10BASE2 (ThinWire) Ethernet Network
Transceiver
Connecting Your System to a Network 5–9
MLO-011208