DEC VAXstation 3100 Owner's Manual page 157

c
Power-Up, Self-Test, and TEST 50 Status and
Error Codes
This appendix lists some of the error codes and status codes for
the power-up test, self-test, and TEST 50. The error and status
codes are the same for each of these tests. For quick reference,
use this table to find the codes for each device.
Failing Test/Device
Tables
Test F - Monochrome video circuits (MONO)
C-1
Test E - Time-of-year dock (CLK)
C-2
Tsst D - Nonvolatile RAM (NVR)
C-3
Tbst C - Serial line controller (DZ) C-4, C-6,
C-6,C-7
Test B - System memoiy (MEM)
C-8
Tbst A - Memory management (MM)
C-9
Tsst 9 - Floating pdnt (FP)
C-10
Test 8 - Interval timer (IT)
Tfests 6 and 7 - SCSI bus controller (SCSI-A and SCSI-B)
C-12,
C-13,
C-14
Test 5 - Interrupt controller and Ethernet ID ROM (SYS)
C-15
Test 4 - Graphics coprocessor module/color option (8FLN)
C-16
Test 3 - Not supported
Test 2 - Not supported
Test 1 - Ethernet network circuits (NI)
C-17
Power-Up, Self-Test, and TEST 50 Status and Error Codes C-1