DEC VAXstation 3100 Owner's Manual page 136

&
Printer Cable
8-2 Adding Options
5 Attach the free end of the serial line cable to the printer port
on the back of the system unit, as shown in Figure 8-1.
Figure 8-1 Connecting a Printer Cable to ttie System Unit
MLO-002242
When building your software, you will need the following
information to set up a printer port for your VAXstation 3100
Model 48. Table 8-1 Hsts the device names that are specific for
your operating system.
Table 8-1 Device Nannes for Your Operating System
Operating System
Device Name
VMS TTA3:
ULTRDC
/dey/tty03
It is important that along with the device-specific information
found in Table 8-1 you consult the following documentation for
important information on connecting a printer to your operating
sjrstem:
For VMS:
System Management Volume lA, Guide to Setting Up a
VMS System
General User Volume 4, DCL Dictionary