Locking Tabs
It is important that the disc be correctly mounted in the
caddy. The compact disc drive cannot access data from a disc
that is incorrectly mounted. If the disc is incorrectly mounted,
remove it and remount it in the caddy.
3.2.4 Removing the Compact Disc from ttie Caddy
To remove the disc from the caddy for cleaning or caddy repair,
perform the following steps:
1
Hold the caddy so that it is facing label side down. Locate the
locking tabs on either side of the disc housing.
2
Press down on both of the locking tabs while sUghtly
separating the housing fr^m the sleeve. Use your fingernails
or a sharp, pointed instrument. See Figure 3-5.
Figure 3-5
Pressing Loclcing Tabs
MLO-002240
When both tabs have been disengaged, pull the disc housing
out to about the midpoint of the disc.
Hold the disc housing on each side. Exert inward pressure on
the housing so the disc will not fall out. Remove the sleeve
from the housing. Place the sleeve aside.
Learning About Your System 3-7