DEC VAXstation 3100 Owner's Manual page 16

^ The mouse icon identifies the connector where you put the mouse
[ (j^ cable (or the tablet cable).
©-
o
S3
h
xvl
This icon appears on the cable for the mouse (or tablet). You put
this cable into the port with the mouse icon.
The monitor icon identifies the connector where you put the
monitor cable.
The printer icon identifies the port for the printer cable. This port
also supports a hardcopy terminal or an additional video terminal
for alternate console mode. See Appendix A.
The communications port is identified by this icon. You put the
modem cable here, if you have this option.
The alternate console switch is identified by this icon. Appendix A
gives instructions for installing and using an alternate console.
The row of diagnostic lights on the back of the system imit is
identified by this icon. Chapter 7 describes how to use these ' ^
lights.