Changing The Default Keyboard Language (Language) - DEC 3000 800 Owner's Manual

Changing the Default Diagnostic Startup Mode (diag_quick)
The default setting for the
Default Setting
off, so that normal diagnostic tests of TURBOchannel devices are
performed at each system startup.
If
be tested. If it is set to off, all installed TURBOchannel options
will be tested when the system power up self tests (POST).
To set the
Command
command. The system responds as shown.
Syntax
>>> set diag_quick on
DIAG_QUICK = ON
>>>
Using the on parameter changes the default setting.

Changing the Default Keyboard Language (language)

Description
The
layout to one of sixteen available languages. This command is
applicable only for a DEC 3000 Model 800/900 AXP workstation
with a TURBOchannel graphics option.
Available You can set the
Settings for supported languages.
language
The default setting for the
Default Setting
English.
Command To set the
command:
Syntax
>>> set language
10–10 Changing Environment Variables
is set to on, some TURBOchannel devices may not
diag_quick
environment variable, enter the following
diag_quick
Return
language environment variable sets the console keyboard
language
environment variable, enter the following
language
Return
environment variable is
diag_quick
environment variable to any of the
environment variable is
language