Changing The Keyboard Features - DEC Digital PC 3500 System Reference Manual

Changing the Keyboard Features

To change the keyboard features:
1. Reboot the computer and enter Setup.
2. Highlight the "Main" menu.
3. Highlight "Keyboard Features" and press [Enter].
If you wish to leave "NumLock" on, skip steps 4 and 5, otherwise:
4. Highlight "NumLock."
5. Press the [+] key to sequence through your options, select "Off."
If you wish to leave "Key Click" disabled, skip steps 6 and 7, otherwise:
Select "Key Click."
6.
7. Press the [+] key to select Enable.
If you wish to leave the "Keyboard Auto-Repeat Rate" (the number of times per
second a character repeats) the same, skip steps 8 and 9, otherwise:
Highlight "Keyboard Auto-Repeat Rate."
8.
9. Press the [+] key to sequence through the available options.
If you wish to leave the "Keyboard Auto-Repeat Delay" (the time that elapses before
the character begins repeating) the same, skip steps 10 and 11, otherwise:
10. Highlight "Keyboard Auto-Repeat Delay."
11. Press the [+] key to sequence through the available options.
12. Press [Esc] twice then [Enter] twice to exit the BIOS Setup utility and to
reboot the computer so changes immediately take effect.
Using the BIOS Setup Utility
2-21