Changing The Exam Type; Accessing The Exam And Quickset List - Siemens SONOLINE G50 Instructions For Use Manual

Changing the Exam Type

You can change the exam type at any time by making a selection from the
Exam and QuickSet List. System-defined exam types and user-defined
QuickSets display on this list. A QuickSet is an optimized configuration of
imaging parameter settings for a specific transducer, exam, and
operating mode.
Use the system presets to select an exam or QuickSet to automatically
activate when you power on the system.

Accessing the Exam and QuickSet List

Use one of these methods to access the Exam and QuickSet List:
Press the F5 key on the keyboard.
Press the EXAM key on the control panel.
Roll the trackball to the EXAM button on the New Patient Data or
Patient Data form and then press the SET key.
To select or change the exam type or QuickSet:
1. Access the Exam and QuickSet List by pressing the F5 key on the
keyboard or the EXAM key on the control panel.
The system displays a list of system-defined exam types and a list
of QuickSets.
Note: If the transducer associated with a QuickSet is not connected to the system,
the QuickSet is not selectable.
2. Roll the trackball to highlight the name of the required exam type or the
QuickSet and then press the SET key. The system displays the name of
the selected exam type or QuickSet in the upper left of the image
screen.
3. To redisplay the image screen without selecting an exam type or
QuickSet, select the Cancel button.
[ 1 ] I N S T R U C T I O N S F O R U S E
5 B e g i n n i n g a n E x a m i n a t i o n
[2] Instructions for Use
Creating
QuickSets Ch A1
F4
Boot Up
Boot Up Exam
& QuickSet
5 - 1 5