Non-IPX8 Immersion Levels
Caution: To avoid damage to the transducer, observe the immersion levels
indicated for each transducer type. Transducers without the protection level
IPX8 do not have the "IPX8" symbol on the connector of the transducer. If a
transducer does not have the "IPX8" symbol on the connector of the transducer,
then observe the Non-IPX8 Immersion Level illustration,
!
Endocavity
Linear
Note: Non-IPX8 transducers meet Ingress Protection level IPX7 to the depth of the
immersion line shown in the above illustration.
[ 1 ]
I N S T R U C T I O N S
Curved
Phased
F O R
U S E
2 S a f e t y a n d C a r e
2 - 2 9