Select Mode Selections Stress Echo; Review Mode Selections Stress Echo - Siemens SONOLINE G50 Instructions For Use Manual

Select Mode Selections Stress Echo

Note: For a continuous stage, the Home, To Left, To Right, and End buttons display
loops saved for the stage (not the view).
Note: For a continuous stage, the Scroll Up and Scroll Down buttons display the
preferred loop for the view. If no loop is designated as preferred for the selected view,
then these buttons have no effect.
Button in Select Mode

Review Mode Selections Stress Echo

Button in Review Mode
[ 1 ] I N S T R U C T I O N S
Selection
Scroll Up
Scroll Down
Home
To Left
To Right
End
Selection
Shuffle Mode
Shuffle back
Shuffle forward
Display
Selected Loops
F O R U S E
Description
Displays loops in the previous view.
Displays loops in the next view.
Selects the first loop in the currently displayed view.
Selects the previous loop in the currently
displayed view.
Selects the next loop in the currently displayed view.
Selects the last loop in the currently displayed view.
Description
Displays the view with the selected (highlighted) label
for the phase with the selected (highlighted) label.
This button is available only when the
Display Selected Loops button is disabled.
Displays the previous view when that view is
not deselected.
This button is available only when the
Display Selected Loops button is disabled.
Displays the next view when that view is
not deselected.
This button is available only when the
Display Selected Loops button is disabled.
Displays the selected phases side by side for each
selected view.
This button is available only when the Shuffle Mode
button is disabled.
3 S y s t e m C o n t r o l s
3 - 5 7