Siemens SONOLINE G50 Instructions For Use Manual page 130

View Tab Selections
Balloon
Add to VOI
Subtract from VOI
[untitled]
Undo
Redo
Reset
Manage Presets Dialog Box Selections
To access this dialog box, select Manage... from the View tab.
Manage Presets
Dialog Box Selections
Name
Save
Delete
OK
[ 1 ] I N S T R U C T I O N S
Description
Displays a pencil icon for drawing a freeform shape around data on
a slice to define a volume of interest (VOI).
Note: When this function is active, the LCD selections, tab selections,
and toolbars are unavailable. Printing and VCR functions are
also unavailable.
Displays a pencil icon (with a plus sign) for drawing a freeform
shape around data on a slice to be added to the volume of
interest (VOI).
Note: When this function is active, the LCD selections, tab selections,
and toolbars are unavailable. Printing and VCR functions are also
unavailable.
Displays a pencil icon (with a minus sign) for drawing a freeform
shape around data on a slice to be removed from the volume of
interest (VOI).
Note: When this function is active, the LCD selections, tab selections,
and toolbars are unavailable. Printing and VCR functions are
also unavailable.
Cancel the last operation performed.
Perform the last canceled operation again.
Restores the initial display settings for the volume and slices,
including the LCD selections at the time of acquisition.
Description
Use the keyboard to enter a name for a new view preset.
Stores the current 3D settings (except data removal) as a view preset, using the
name entered in the Name text box.
Deletes the selected view preset.
Closes the dialog box.
F O R U S E
3 S y s t e m C o n t r o l s
Icon
---
3 - 7 3