Adjusting Controls On The Monitor - Siemens SONOLINE G50 Instructions For Use Manual

Adjusting Controls on the Monitor

!
Monitor.
Note: Factory-defined imaging presets were created using default settings of the
brightness and contrast controls of the monitor. Adjusting the brightness and contrast
controls on the monitor may affect the image optimization intended by the factory-defined
imaging presets.
For consistency in image reproduction, adjustments to the brightness and
contrast of the viewing monitor should be made prior to adjusting the print
quality of installed documentation devices.
To adjust the brightness or contrast control for the monitor:
Note: Always begin adjusting your monitor with the controls set to the factory defaults,
and then adjust each control separately to suit your preference and the lighting conditions
in the room.
Press the right contrast button to increase the display contrast. Press
the left button to decrease the contrast.
Press the right brightness button for a brighter image with a lighter
background. Press the left button for a darker image.
[ 1 ] I N S T R U C T I O N S F O R U S E
1 Contrast Control (2)
2 Brightness Control (2)
3 ! Monitor self test
4 Degauss
4 S y s t e m S e t u p
4 - 1 3