Beginning An Exam - Siemens Sonoline G20 Quick Reference Manual

Medical
Note: The term select is used to describe the action of rolling the trackball to position the pointer (cursor) on an object and then
pressing SET on the control panel.

Beginning an Exam

 Press the Power Switch on the upper left side of the keyboard. A blue light will indicate the power is on.
To enter data for a new patient:
1. Press NEW PATIENT (F1)
2. Enter the patient name and ID using the keyboard
3. Enter other pertinent information
4. Use TAB to move to next data field
5. Use TRACKBALL and cursor to select OK
6. If exam is not the Boot Up exam, press Exam to select the correct Quickset
7. Quicksets can also be recalled using EXAM key (F5) on keyboard
Optimizing the 2-D Image
To adjust...
One Touch Gain Optimization
More Penetration
Clean out noise/clutter
Overall Gain/brightness
Depth
Focus
Zoom
Gain
Bright Light Scanning
To Rotate or Flip Image L/R
 To change image orientation from left to right
 To rotate the image 90°
G20 Quick Reference
Do this:
Press TGO (option) button
Push MULTIHERTZ toggle down
Push MULTIHETTZ toggle up to THI
Rotate 2-D knob
Rotate DEPTH/ZOOM knob
Push FOCUS toggle up or down
Press DEPTH/ZOOM knob to select
Adjust DGC sliders
Use Gray Map D or L
 Press the L/R FLIP key on the control panel
 Press L/R FLIP key while pressing and holding the SHIFT
key on the keyboard.
Page 2