Table of Contents
Advertisement
4 S y s t e m S e t u p
System Startup
The first step to operating the ultrasound system is to connect the system
to a power source.
Plugging in the System
The ultrasound system has a detachable power cord. Ensure that the
power cord is connected to the system before connecting the cord to the
power source.
WARNING: For 115V units only: to ensure grounding reliability, connect the
system only to a hospital-grade power receptacle.
To plug in the system:
Connect the power cord to the MAINS supply as follows:
230V systems to a 230V standard mains, i.e. "Schuko" receptacle
–
(CEE 7-7 standard).
Example of power panel, 230V.
4 - 1 0
1
Equipotential
connector
2
Power cord
connector
3
MAINS circuit
breaker
I = on
= off
[ 1 ]
I N S T R U C T I O N S
F O R
U S E
Advertisement
Chapters
Table of Contents
