Sterilizing Transducers Vf13-5Sp; Cleaning And Disinfecting Transducers Mpt7-4 - Siemens SONOLINE G50 Instructions For Use Manual

Sterilizing Transducers VF13-5SP

Caution: The transducers have been designed and tested to be able to
withstand sterilization as recommended by the manufacturer of the sterilization
system. Carefully follow the sterilization manufacturer's instructions.
The STERRAD® sterilization system, a hydrogen peroxide gas plasma
sterilization system, is approved for use with the listed intraoperative
transducer(s).
VF13-5SP
To sterilize a transducer with the STERRAD system:
Note: This procedure applies to the VF13-5SP transducer only.
1. Disconnect the transducer from the system.
2. Thoroughly clean, rinse, and dry the transducer.
3. Carefully follow the manufacturer's instructions for sterilization.

Cleaning and Disinfecting Transducers MPT7-4

Refer to specific information for the transesophageal transducer in the
[2] Instructions for Use.
[ 1 ] I N S T R U C T I O N S F O R U S E
2 S a f e t y a n d C a r e
[2] Instructions for Use
Transesophageal
(MPT7-4)
transducers Ch C3
2 - 3 1