Ending An Exam - Siemens SONOLINE G50 Instructions For Use Manual

5 B e g i n n i n g a n E x a m i n a t i o n

Ending an Exam

You can complete the patient examination from the DIMAQ-IP Image screen
or Study screen.
To access the DIMAQ-IP screens (Study screen and Image screen):
1. Press the REVIEW key on the control panel.
If a patient is currently registered, then the system displays the Image
screen. If there is not a patient currently registered, then the system
displays the Study screen.
2. To display the Image screen (from the Study screen), select the
Image Screen button on the left of the screen.
3. To display the Study screen (from the Image screen), select the
Study Screen button on the left of the screen.
To complete the patient examination, choose one of the following:
Select the Close Study button on the left of the Image screen and then
select OK to confirm the operation.
Select the Close or New button in the Study box on the right of the
Study screen and then select OK to confirm the operation.
Press the F1 key on the keyboard to begin a new examination and
select the OK button to register the new patient.
Shut down the ultrasound system.
5 - 2 0
[ 1 ] I N S T R U C T I O N S F O R U S E