3D Selections On The 3D Review Screen; View Tab Selections - Siemens SONOLINE G50 Instructions For Use Manual

3D Selections on the 3D Review Screen

The system displays selections on the left of the 3D Review screen for the
following tabs: View, Data, and Adv. (advanced features). The system also
displays toolbar selections on the left of the selected volume quadrant or
slice quadrant.
Note: The following View tab selections can also be accessed from the volume toolbar:
Bubble Clip, Box Clip, Front Cut Plane, Scalpel, New VOI, and Undo. The following
View tab selections can also be accessed from the slice toolbar: Bubble Clip, Add to
VOI, and Undo.

View Tab Selections

Titles of sections are indicated in brackets ([]).
View Tab Selections
[Layouts]
Volume
Equal Quadrants
Slices on Left
Slices on Top
[Clippers]
Bubble Clip
Box Clip
Front Cut Plane
Display VOI
[ 1 ] I N S T R U C T I O N S
Description
Displays the volume only.
Displays the volume and the three slices. All quadrants are
equally sized.
Displays the volume on the right and the three slices on the left.
The volume quadrant is larger than the slice quadrants.
Displays the volume at the bottom and the three slices at the top.
The volume quadrant is larger than the slice quadrants.
Enables/disables the bubble clip function for removing data from
the volume.
Enables/disables the box clip function for removing data from
the volume.
Enables/disables the front cut plane function for removing data from
the volume.
Note: This selection is not available for the Planes rendering method.
Enables/disables display of the most recently created volume of
interest (VOI).
F O R U S E
3 S y s t e m C o n t r o l s
Icon
---
---
3 - 7 1