Table of Contents
Advertisement
Fields Displayed on the Worklist Search Screen
In this field:
Scheduled Procedures
Last
First
Middle
Patient ID
Date
Accession #
Requested
Procedure ID
Scope:
US only or
This System only
Offline
Fields Displayed on the Choose procedure Screen
(Requires software version 2.0 or higher)
The Choose procedure screen displays the selections in the Worklist Search
screen. Only the Scheduled Procedures drop-down list is available.
Selection
Scheduled Procedures
[ 1 ]
I N S T R U C T I O N S
Enter...
Lists available procedures for the selected study. Procedures are identified by
study code and description.
Last name. Use an asterisk (*) to indicate partially known values. For example, to
search for the last name "Miller", you can enter "Mil*" or "*ler".
First name. Use an asterisk (*) to indicate partially known values. For example, to
search for the first name "Christopher", you can enter "Chris*" or "*pher".
Middle initial.
Identification code for the patient, using up to 64 characters. Searching for the ID
requires an exact match.
Dates for the search.
Identification code indicating the sequence of the current study as related to other
studies for this patient. Used for billing purposes. Typically generated by a HIS/RIS
(Worklist) server.
Searching for the accession number requires an exact match.
Requested procedure ID. Searching for the requested procedure ID requires an
exact match.
Select US only to search for procedures scheduled on all ultrasound systems;
select This System only to confine the search to procedures scheduled on this
ultrasound system.
Select the Use Cache check box to save results of the most recent Worklist
search on the ultrasound system. When Use Cache is selected, fields and
buttons within the Search Criterion section at the bottom of the
Worklist Search screen are not available.
You are unable to enter search criteria or perform a search if Use Cache
is selected.
Select the Reset Cache button to clear any existing Worklist search results
already stored on the ultrasound system. The system then downloads the current
Worklist search results onto the ultrasound system. When you select the
Reset Cache button, the system selects the Use Cache checkbox automatically.
You can then move the system to another location; the results of the search are
available on the ultrasound system even when it is not connected to the network.
Note: Before performing another search, reconnect the system to the network and
ensure that Use Cache is not selected.
Description
Lists available procedures for the selected study. Procedures are identified by
study code and description.
F O R
U S E
5 B e g i n n i n g a n E x a m i n a t i o n
5 - 1 3
Advertisement
Chapters
Table of Contents
