Moving The System - Siemens SONOLINE G50 Instructions For Use Manual

Ultrasound imaging system
Hide thumbs Also See for SONOLINE G50:
Table of Contents

Advertisement

Moving the System

Caution: Preparations before moving the system are important to minimize
potential damage to sensitive components and to avoid safety hazards. Review
the moving instructions before moving the system.
Caution: Do not park, or leave unattended, on a slope. Even when the rear
brakes are engaged, the system may slide down a ramp.
The ultrasound system is designed to be a mobile unit. Before moving the
system to another location, you must prepare for the move by powering off
and securing the system.
Swivel Locking Brake
The ultrasound system has four swivel locking brakes. Each brake has a
locking lever, a swivel lever, and a release lever. Set the swivel locking
brakes with the levers on each wheel.
Example of wheel with locking brake (unlocked).
To lock the brake:
Using your foot, press the "STOP" lever into the lowest position (locked).
To release the brakes:
Using your foot, press the "OFF" lever to release the brake.
To lock the swivel:
Press the lever labeled " " with your foot until the swivel brake locks
into place.
To release the swivel:
Press the lever labeled "OFF" with your foot until the brake unlocks and
the lever labeled " " releases.
[ 1 ]
I N S T R U C T I O N S
F O R
U S E
1 OFF
(release lever)
2 STOP
(
3
swivel lever)
4 S y s t e m S e t u p
4 - 7

Advertisement

Table of Contents
loading

Table of Contents