NeuroTherm NT1100 Operator's Manual page 94

Each graph shows the temperature of each electrode. The NT1100 will control the temperature of each
probe automatically. At the top left of the screen there is a read out of time remaining until the end of the
procedure.
The graphical interface of the lesion screens is also similar to that of the Simplicity ll mode. The
temperature of electrodes 1 to 3 is shown above each graph, with the impedance, voltage, current and
power shown underneath each graph. When the lesion is complete a tone will sound and the energy
delivery will be stopped.
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
OPERATORS MANUAL
®
MODEL NT1100
First a Dual lesion is created between electrode One and
Two
Next a Dual lesion is created between electrode two and
electrode three.
10September2012 Issue 06
10-14