NeuroTherm NT1100 Operator's Manual page 33

Procedure Settings
From the welcome screen press the "Accept" button for the procedure settings screen.
Set up Confirmation gives the user an overview of the information that was entered for the
session, and the option to change any operational parameters.
At the top of the screen the Doctor and Patient are detailed. If it is necessary to make any
amendments to Doctor or patient details select the Finish Button. Then select Doctor or
patient buttons to amend the details.
The NT1100 will then require the user to select the electrode they require to use for a
procedure. By touching the hi lighted drop down box, the following menu will be displayed
Electrode Selection Screen
The Electrode selection screen gives the user the choice to select from a list of Ten options.
The left hand side of the table shows the electrode mode choices, the right hand shows the
output sockets that will be used in a given mode. A corresponding cross in the column
indicates that the socket will be active in that mode. If more than one cross appears in a row
the option indicates a multiple electrode procedure. To make an electrode Selection use the
touch screen to highlight the choice and press the "accept" button. This will return the user
back to the Procedure settings screen.
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
MODEL NT1100
OPERATORS MANUAL
®
10September2012 Issue 06
6-6