Error / Advice Messages; List Of Error / Fault Messages - NeuroTherm NT1100 Operator's Manual

8

ERROR / ADVICE MESSAGES

If the NT1100 detects a fault or condition that the user should be advised of, it will automatically
generate a message on the screen.
There are 4 classifications of message, based on the severity of the operating condition:
Level 1 – User Advice
This will give the user a message in the bottom right 'advice box '. If there are multiple
advice messages, they will scroll in sequence every few seconds.
Level 2 – System Status
Gives information on the status of integrated devices used in the NT1100
Level 3 – User Warning
User warnings are recoverable. They alert the user with a central message box, which will
overlay any graphs, menus or active screens. The user will have to acknowledge the
warning on screen or will have to rectify the issue by adjusting the controls to continue.
Whilst the message is displayed, the system will be in a safe state*
Level 4 - Critical Fault
This is the most severe classification. During regular operation, this state should never
be witnessed by the user. A critical fault may require the user to turn off the power. The
critical fault will be full screen, and will give the user guidance on how to proceed. Whilst
the screen is displayed, the system will be in a safe state*
*During a safe state, the machine does not output any power to the patient.

List of Error / Fault Messages

Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
MODEL NT1100
OPERATORS MANUAL
®
10September2012 Issue 06
8-1