NeuroTherm NT1100 Operator's Manual page 43

When the Doctor is satisfied that the electrode, is at the correct position to perform the
procedure. The Thermal lesion can be started.
Performing a Lesion
To switch the unit to lesion mode, press the
For this quick start example we will perform an automatic thermal lesion. Ensure that the correct
size Dispersive electrode is connected to the patient, and that it is connected to the Dispersive
connector on the NT1100
The NT1100 is now ready to apply power through the electrode in socket 1. To begin press the
'Auto Start'
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
OPERATORS MANUAL
button on the front control panel.
®
MODEL NT1100
button. The lesion screen will appear.
10September2012 Issue 06
6-16