NeuroTherm NT1100 Operator's Manual page 93

NEUROTHERM RADIO FREQUENCY LESION GENERATOR 10-13
®
MODEL NT1100
OPERATORS MANUAL
3. Simplicity lll
Simplicity lll RF is selected in the "Procedure Setting" screen menu, with the Electrode Selection pull
down menu. Press Simplicity lll Electrode and it will highlight. Then press 'Accept'.
From the "Procedure Settings" screen press "Accept". This will automatically display the "Sensory
Stimulation" screen. Note each electrode has its own graphical area.
Stimulation is done as in three electrode mode.
Refer to NT1100 Manual sec. 9.5 Multiple Electrode Lesioning for lesion temperature and time settings.
Press "Lesion"
Electrode 1 is displayed on the left, with Electrode 2 in the middle and Electrode 3 being displayed on
the right.
Document 109.00 10September2012 Issue 06