NeuroTherm NT1100 Operator's Manual page 14

MULTIPLE PROBES
The NeuroTherm can be operated with 1,2 or 3 probes. When in Stimulation Mode
each probe is selected by the operator for Stimulation. In RF Lesion, Pulse RF or Pulse
Dose Mode the generator energises all connected probes in a time interlacing method.
In multiple probe operation not all pulse rates are available.
Features
MAJOR FEATURES
Touch Screen Operation – User interface set up and software control via TP 400
Processor.
Windows CE4.2.NET Operating System.
12.1" LCD Screen with Back lighting and wide antiglare visibility.
Printer Support
Remote Mimic Screen
Storage Device
Service Ports
Any equipment connected to rear socket must comply with IEC60950 and IEC60601-1
Use only parts supplied by NeuroTherm Ltd. Any other parts will void the warranty and
may cause danger to the patient.
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
OPERATORS MANUAL
®
MODEL NT1100
(a) Hardware and Software lockout if RF Power
Control not initially set to zero.
(b) Warning on screen if RF Control is not initially set
to zero or if Auto is selected and RF control is not
off.
(c) LED Flashes on front panel to indicate machine is
delivering power.
(d) Three output sockets to accept a variety of probes,
(including Cordotomy (optional extra)) and enable
multiple probe operation.
(e) Hardware lockout if temperature exceeds 95°C.
Via Bluetooth adaptor internally fitted.
Optically isolated running over CAT5 Cable to External
TFT screen up to 300 metres.
USB Memory Stick for downloading log files.
Only accessible by service engineers for keyboard +
mouse
10September2012 Issue 06
3-6