Getting Started; General Description Of Screen Displays - NeuroTherm NT1100 Operator's Manual

6

GETTING STARTED

The NeuroTherm NT1100 is a Generator set up by its touch screen and operated by its
Membrane Front Control Panel.
From the "Procedure Setting" screen the Doctor can select the parameters they want to use, for
the treatment of a
potential users of the machine can also select their own favourite parameters.
Each time the machine is switched on it will revert to the default parameters, but a Doctor can
reselect the parameters by selecting the name on the "Doctor" Screen from the drop down list.
Once the machine is set up the treatment of a patient it is controlled via the front Control Panel
with some adjustments on the touch screen, the screen displays the treatment being
administered to the patient together with a display of all key measurements.

General description of screen displays

Self test Screen
The NeuroTherm NT1100 features a self -test procedure, which operates after the operating
system has loaded when the machine is turned on. This checks hardware condition, data
storage capacity and looks for any external devices such as the Bluetooth printer.
If the machine indicates an error on the test screen, the test will stop. Contact your distributor
or phone NeuroTherm Ltd (contact details shown in section 11)
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
MODEL NT1100
OPERATORS MANUAL
patient, which are then stored by the machine. Up to twelve Doctors or
®
10September2012 Issue 06
6-1