Preset Step Profiles - NeuroTherm NT1100 Operator's Manual

Preset Step Profiles

Preset profiles are only available in Single electrode modes
From the Welcome Screen press "Accept " to get to the procedure setting screen. Or select the
"Doctor Setting" Screen. To access the Preset Step Profiles P1/P2/P3 first access the Thermal
Lesion by pressing the green Thermal Lesion box on the right hand side of the display. Under
the drop down for 'Step' select the requested profile and press 'Accept' to continue to the
Stimulation screens. Carry out Motor and sensory stimulation "Log "results
The P1/P2/P3 preset step profiles are only operational is automatic mode. Press the
button. Then press the 'Auto Start'
The NT1100 will automatically control the procedure, displaying the temperature and time on the
graph. When the procedure completes the tone will sound and the power will switch off.
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
OPERATORS MANUAL
®
MODEL NT1100
button to begin the lesion.
10September2012 Issue 06
7-19